home/Media/Media releases

STORAGE RACK PLACEMENT SKILLS

Time:2018.09.25

The dimension demand of the rack is related to the bearing material or container. The size can be made, but it is best to give the size of the initiative by the rack supplier. On the one hand, it is relative professional. On the other hand, it assumes problems and can also share part of the obligation.

 

Rack loading and unloading equipment. At present, whether there are racks stacking equipment, suppose that there are many factors such as reverse radius of equipment, equipment width and so on.

 

The warehouse itself is loaded on the ground, and this figure needs to be obtained from the contractor. Especially heavy racks should be paid attention to.

 

The warehouse can have various kinds of materials that have different storage time. This needs to think about the way of entering and leaving the warehouse or the way of storage to find the way to put the storage rack that is really suitable and can reach the higher space application rate.

 

In storage racks, some people often pay attention to how many storage racks can be placed at most. The more warehouse racks are placed, the higher the utilization rate of warehouse is, but the feasibility and convenience of actual operation will often be ignored. A single row of racks on one side of the wall is a point of practical feasibility. If two rows are placed on one side of the wall, then the racks cannot be put into the product, and it will be very difficult to get out, and it will cause too much waste without a single row of racks.

 

The placement of the products is closely connected to the beauty of the whole. In the storage rack, the requirement for the placement of the product lies in the particularity of the goods. It is mainly manifested in whether it can be stacked, suspended, vertical, horizontal and bulk. The design of storage racks should ensure that the goods have proper area and space when they are stored, so that the goods can be arranged horizontally to display their varieties.

 

The turnover rate of rack stock is sorted. The goods that are frequently accessed should be placed on the nearest warehouse rack at the exit entrance; of course, as the life cycle, season and other factors change, the turnover rate will change.

 

The marking of the goods should be oriented to the channel, not only to face the channel outside, but also to mark all the goods in the same direction, so that the staff can work smoothly and smoothly, without interrupting the work to confirm the marking, the convenience of work, and the efficiency of the work.

 

In fact, whether it is for e-commerce or other industry customers, warehouse rack planning is a small input, so in the early planning, we must consider the complete, so that some unnecessary problems in the use of the process.

 

Heda rack is specialized in producing various pallet rack, cantilever rack, electric mobile rack storage system, mezzanine and platform, shuttle car automatic storage system, push back rack, longspan shelving, rivet shelving, drive in rack, carton flow rack, stacking rack and other related storage equipment.

 

Heda rack strictly implements ISO9001, FEM10.2.02, SEMA, and AS4084-1993 standard in all operations. Heda rack offers a wide range of products to meet all of your order fulfillment & material handling needs: Teardrop pallet rack, Dexion pallet rack, European pallet rack and other Work Apparatus. Whether you are looking to populate an entire warehouse or you are in need of a single piece of equipment, Heda rack has a solution for you.

Feedback

Please include your contact information if you'd like to receive a reply.